Features
- 2500 V galvanic CAN bus isolation
- Up to 1 Mbit/s data rate
- Automatically adjusts to CAN baud-rates, no need to set data rate
- Standard 120 Ohm termination resistor with optional cut trace
- Wide input voltage range of 7-28v DC
- Extended working temperature range of -40 to +105 degrees C
- M12 5-Pin barrel connector standard
- IP56 splashing water rating
- Custom electrical connector options available
Applications
CAN Bus data transmission is ubiquitous on vehicles and mobile equipment and is a popular protocol for industrial communications applications. Many CAN data busses are powered by a single power supply; however, on busses with different power supplies voltage transients can travel across the data bus causing signal integrity problems and possibly destroy CAN connected devices.
CAN Isolator Loose Pigtail 0.5 m
The CAN-ISO-2500 is a CAN bus isolation device for use on CAN bus networks in mobile or stationary applications. The device features 2500v of isolation between the HV and LV sides and supports CAN baud rates of up to 1 Mbit/s.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.